Tips From the Moving Business Pros: How to Move a Pinball Device



With pinball making a substantial resurgence throughout the nation, Gentle Giant wishes to make certain that these classic, gorgeous makers stay damage-free while being transferred. Oh, and we desire individuals moving them to be safe, too.

In the beginning glimpse, pinball makers can appear intimidating to move since of their fragility, size, and weight. Thankfully, our competent Giants have a couple of techniques up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox

Most of modern-day pinballs (made in the last Twenty Years or so) have a hinge system which enables the headbox to be folded down. Early pinball makers had their headboxes bolted on, utilizing either two or four bolts. All Electro-Mechanical pinballs utilize this system, in addition to the early Solid State devices.

Later on makers have hinges and use a latching system to keep the headbox upright. There might likewise be 2 bolts inside as added safety, in case the lock is broken or accidentally un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball machines, you have to get rid of the headbox rear gain access to panel to access to the bolts and plugs inside. Normally this panel has a lock on it to keep it in location, but over time the key might have been lost. Rather often, there is a screw keeping this panel in place.

When within, get rid of the bolts and unplug the large ports that have electrical wiring decreasing into the machine. You may want to identify these adapters to put them back in the ideal spot, but they must be various sizes, making it difficult to plug back incorrectly.

You can now eliminate the headbox totally, or fold the headbox down onto the playfield glass. Make certain you utilize some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in place.
Early Strong State Pinballs

For early Strong State Pinballs, you will require to get rid of the back glass. There is a lock situated on the headbox in one of three locations: the left-hand side at the top, right-hand side at the top or on top of the headbox in the.

When opened, get rid of the back glass by raising it up using the lift channel (at the bottom of the glass), and then pull it out from the bottom.

Open up the back box light panel by lifting the latch located on either the left-hand side or right-hand side. The panel can now swing out towards you, and provide you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to raise the light panel in order to swing it open.

Now that you are within, you can remove the bolts, and any plugs that have wires going down into the machine. You may wish to identify these plugs to put them back in the ideal area. You might not need to remove the plugs, as the wiring ought to be long enough to enable the headbox to be folded down.

At this moment, you can secure the light panel and change the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Using the supplied key, turn the latch 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the device. This is a basic setup and needs no tools.

You're done if you can now fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.

You require to get within if you can not fold the head box down. There is a lock situated at the top of the back glass in the center. Utilize the provided secret to unlock, and remove the back glass by lifting it up from the bottom, and then pulling it out from the bottom.

Next, you will require to get rid of the display screen panel. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

Get rid of the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the get more info back glass in place.
Removing the Legs.

Pinball Machine legs are held in place by eight bolts. The modern pinballs have captive nuts or threaded plates inside for the bolts to screw into.

But these captive nuts and threaded plates can be damaged, and using additional nuts might have been needed. If this holds true, you will require to open the front door of the pinball, slide out the playfield glass, and raise the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and eliminate the lock down bar. Slide out the playfield glass, and put in a safe place. Next, lift up the playfield by placing your hand where the ball drains, and lift the playfield up.

You should now have access to any nuts that may have been utilized. As soon as any nuts have actually been gotten rid of, change the playfield glass and lock down bar, and lock the front door.

Make certain to mark or keep in mind which legs are for the front and back, as they will be changed in this contact form a different way to fit.
Packing the Pinball.

You are now prepared to transport your pinball machine. Before you load it, make sure you get rid of the pinballs so they do not bounce around throughout transportation.

If you are moving the pinball utilizing a van or SUV, it might be simpler to eliminate the legs just prior to loading the machine. Get a pal to have and help one of you supporting the pinball, while the other removes the front legs. Slide the maker in, then get rid of the back legs. It is much easier to load the maker front.

Make sure you strap the pinball in, as you do not want it moving if you have to stop unexpectedly!

For Electro-Mechanical pinball makers, you require to eliminate the headbox rear access panel to gain access to the bolts and plugs inside. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

If you are moving the pinball using a van or SUV, it may be much easier to get rid of the legs simply prior to packing the machine. Grab a good friend to assist and have one of you supporting the pinball, while the other eliminates the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *